G4X 2D launch control

[Knox]

Is there a way to always active launch control and disarm after 10kph like g4+ 2d launch control with g4x ?  

[koracing]

You could certainly set the activation control to a virtual aux and then use whatever logic you wanted for activation parameters beyond the basic Launch settings.

[Vaughan]

If you want Launch control to always be active under 10kph then set the Activation Control to Always ON and the Disarming Speed to 10 kph. G4X doesn't have a specific 2D Launch mode so use the 3D Mode with a single axis on the table.

[Knox]

3 hours ago, Vaughan said:

If you want Launch control to always be active under 10kph then set the Activation Control to Always ON and the Disarming Speed to 10 kph. G4X doesn't have a specific 2D Launch mode so use the 3D Mode with a single axis on the table.

I actually did what you write but it didn’t work so I thought it doesn’t work like that. But probably I did something wrong. What axis should I use ? And also ecu shows driving wheel speed and driven wheel speed which show be selected for speed source. 

[Adamw]

Disarming speed setting uses the driven wheel speed.  

Attach a log and your tune if you need further help.  

[Knox]

On 11/18/2020 at 1:33 AM, Adamw said:

Disarming speed setting uses the driven wheel speed.  

Attach a log and your tune if you need further help.  

Thanks, I make driven wheel speed source to gp speed 1 (like driving wheels) and 3d mode with single axis like Vaughan wrote and works perfect now.