Guest |1012| Posted March 16, 2012 Report Share Posted March 16, 2012 I am using V4.8.8 and can't find the "Idle Ignition table". Could someone post a screen shot showing where in the menu system it can be found. Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted March 16, 2012 Report Share Posted March 16, 2012 Screen shot attached. If you are on 4.8.8 I would be changing to 4.8.82 or 4.9.1 as soon as you can. Quote Link to comment Share on other sites More sharing options...
Guest Marcel B Posted March 17, 2012 Report Share Posted March 17, 2012 Hello there , is this table available for ROTARY configurations also ? I can't find it , seems to have been replaced by the trailing split table. Quote Link to comment Share on other sites More sharing options...
Guest |1012| Posted March 18, 2012 Report Share Posted March 18, 2012 Will update to 4.9. I'm currently using 4.8.8.11 and the idle ign table does not come up. The last table available is "Ign Table 1 - Active". Quote Link to comment Share on other sites More sharing options...
Guest |1012| Posted March 18, 2012 Report Share Posted March 18, 2012 Ive now updated to 4.9 and have the table available. However, when I try to set up the table as shown in the help file an error comes up with "values sent to ECU outside min/max bounds' and the table sets the min RPM to 0. Is there a set-up file that I can use with the correct set-up for the idle ign? Thanks Quote Link to comment Share on other sites More sharing options...
Guest |1012| Posted March 18, 2012 Report Share Posted March 18, 2012 HI, Just disregard everything I have said. As long as you follow the words in the help file then it all works. "Horizontal axis set to Idle Tartget Error". It helps if you read before jumping in. Thanks Quote Link to comment Share on other sites More sharing options...
Guest Marcel B Posted March 20, 2012 Report Share Posted March 20, 2012 Hello there , is this table available for ROTARY configurations also ? I can't find it , seems to have been replaced by the trailing split table. Can someone please answer my question :?: Quote Link to comment Share on other sites More sharing options...
Simon Posted March 21, 2012 Report Share Posted March 21, 2012 Hi Marcel Yes in rotary mode the Idle ignition trim is still available. The table should appear when online with an ECU and idle ignition trim is turned on. Quote Link to comment Share on other sites More sharing options...
Guest Marcel B Posted March 21, 2012 Report Share Posted March 21, 2012 Thanks , i'll look for it then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.