Focos wrc Posted December 17, 2020 Report Share Posted December 17, 2020 Hi Anyone know how I can get egt info to be sent from my link fury so I can display it on the mxs strada 1.2 dash please? Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 17, 2020 Report Share Posted December 17, 2020 Yes, it will need a custom CAN stream set up in the dash though. If you attach your dash and ecu config I will set it up. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted December 18, 2020 Author Report Share Posted December 18, 2020 Hi That's great. I will get them over later this eve. Thanks again Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted December 21, 2020 Author Report Share Posted December 21, 2020 Hi Please see attached files. Would it also be possible to do the same for coolant pressure too please? Many thanks Joe Sandy complete.pclr MXS 1.2 Strada Joe.zconfig Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 22, 2020 Report Share Posted December 22, 2020 Try these. Sandycomplete new CAN.pclr MXS 1.2 Strada Cliente.zconfig Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted December 22, 2020 Author Report Share Posted December 22, 2020 All seems to be working fine. Cheers Adam Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 17, 2021 Author Report Share Posted January 17, 2021 Hey Sorry to bring this back. Although these do show on my dash, for some reason this file seems to stop the engine from firing and the engine protection is 'on' Reloaded the original file and it's fine.... Any ideas? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 17, 2021 Report Share Posted January 17, 2021 File compare doesnt show any differences. Can you do a short log of an attempted start with the new file. Focos wrc 1 Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 19, 2021 Author Report Share Posted January 19, 2021 Hey I would love to send a log but I have a new problem I hope you can solve. For some reason my ethrottle has stopped working now. I went to recalibrate it as I had replaced the pedal sensor bracket. Now unless I am in set up mode the tb wont move.... If I try and calibrate the tips it does it but still wont work. I noticed during the calibration the values are alot different to what I see when pushing the pedal afterwards. Try and set it up manually and it doesnt like that at all.... sandy after wiring, no tb.pclr Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 19, 2021 Author Report Share Posted January 19, 2021 I think I may have found the issue. Noticed when trying to recalibrate the aps, the two lines for main and sub which I assume should go up and down with pedal movement when setting it up. They are completely erratic and are all over on the press part Then on the release they barely move whatever I do with the pedal. Would I be right to assume the pedal sensor has had it? Also noted the tb on tps calibrate, it does what it should. But when in test mode and moving the pedal the butterfly will only open not even half way... This could be why on your file it was in engine protect? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 19, 2021 Report Share Posted January 19, 2021 There are two independant pedal sensors, it is unlikely that they both failed. More likely a wiring issue. Can you give us a log. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 19, 2021 Author Report Share Posted January 19, 2021 It was working fine. Had the sensor out to make a new bracket. Put it back in. Re calibrated And now the issue. I may have dropped the sensor when it was out, cant honestly remember.... Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 19, 2021 Report Share Posted January 19, 2021 44 minutes ago, Adamw said: Can you give us a log. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 19, 2021 Author Report Share Posted January 19, 2021 Hopefully this is enough. Not fired car but worked the pedal ethrottle error.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 19, 2021 Report Share Posted January 19, 2021 Pedal looks fine in that log. So can you give us a log of it trying to start. Quote Link to comment Share on other sites More sharing options...
mapper Posted January 20, 2021 Report Share Posted January 20, 2021 BTW K-type thermocouple can directly be connected to the AIM MXS Strada analoge inputs. Then send it to the ecu over can if you need it there. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 22, 2021 Author Report Share Posted January 22, 2021 Update Got the car running and tb working ok on original map. Attached is a log of the files you sent. Before I even try to fire the engine protection is on...then when crank both fuel and spark limit 100% egt log non fire.llg Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 28, 2021 Author Report Share Posted January 28, 2021 Hey Adam, you see any issues on there? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 28, 2021 Report Share Posted January 28, 2021 Sorry, missed your last reply. I get engine kill regardless whether I use your original map or the one with modified CAN that I done for you. This is because you have CAN Antitheft turned on, but the ecu is not attached to anything that tells it to turn the antitheft off. Set "Allow CAN antitheft request" to off and it should work. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 29, 2021 Author Report Share Posted January 29, 2021 Hey If I put my original on it all works fine. But just noticed on yours my can set up for the toucan is missing...the toucan does have anti theft set up on it.... Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 30, 2021 Report Share Posted January 30, 2021 15 hours ago, Focos wrc said: the toucan does have anti theft set up on it.... Then that is your problem. You just asked me for a CAN set up to transmit EGTs to the dash, never said you had a toucan set up as well. If you copy the stream 3 from your original map it should work. Quote Link to comment Share on other sites More sharing options...
Focos wrc Posted January 30, 2021 Author Report Share Posted January 30, 2021 Ok cool, will try it. I assumed you would have seen it all from my original file Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.