MartinS Posted December 20, 2020 Report Share Posted December 20, 2020 Hi, wiring up a Subaru EZ36 to a G4 Xtreme. I'm a little confused about what to do with the cam timing sensors. The G4 wiring manual asks for Trigger 1 to be crank sensor, and Trigger 2 to be RH intake cam sensor (the side with cylinder #1...I think that's correct!). However, the manual also suggests wiring the cam position sensors in the D1-4 positions for quad cam engines with VVT. Should I split the wire from the RH intake cam sensor and run one tail to Trigger 2 and one to D1 or can I leave D1 or Trigger 2 empty? Thanks in advance... Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 20, 2020 Report Share Posted December 20, 2020 Trigger 1 crank. Trigger 2 LH intake cam. DI2 RH Intake cam DI3 LH Exhaust cam DI4 RH Exhaust cam. Quote Link to comment Share on other sites More sharing options...
MartinS Posted December 20, 2020 Author Report Share Posted December 20, 2020 Thanks! Can DI1 be tasked to something else? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 20, 2020 Report Share Posted December 20, 2020 Yes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.