Mr_Flibble Posted December 20, 2020 Report Share Posted December 20, 2020 Well, I have replaced the injectors and I checked the timing and set it, managed to get the engine to run for a short time. When I opened the throttle a little it died. Checked the timing again and it seems to of gone way off and I can't start it again. Something just seems wrong. Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 20, 2020 Report Share Posted December 20, 2020 Is it still distributor? Can we have a bit more background info - New install or old install previously running fine? If it "seems like the timing is way off", what does the timing light show? Can you attach your tune and a log of it cranking. Quote Link to comment Share on other sites More sharing options...
Mr_Flibble Posted December 21, 2020 Author Report Share Posted December 21, 2020 It's a new install and I got annoyed and reverted everything and it runs (started to think it was a mechanical issue) so technically everything looks good. Is there someone I can just pay to fix it all? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 21, 2020 Report Share Posted December 21, 2020 You havent given any information about the problem or attached the tune or log as requested so it is fairly difficult for anyone to help you without this. If you want somebody to fix it for you then have a search of the Link dealer list for someone near you. Quote Link to comment Share on other sites More sharing options...
Mr_Flibble Posted December 22, 2020 Author Report Share Posted December 22, 2020 Sorry the laptop I was using decided to update. Log 2020-12-20 2;54;14 pm.llg solllu.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 22, 2020 Report Share Posted December 22, 2020 What size injectors? Quote Link to comment Share on other sites More sharing options...
Mr_Flibble Posted December 22, 2020 Author Report Share Posted December 22, 2020 440cc now Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 22, 2020 Report Share Posted December 22, 2020 Have you tried increasing the master fuel? It is currently set at 8ms, I would expect it to be more like 15-20ms for such small injectors. Quote Link to comment Share on other sites More sharing options...
Mr_Flibble Posted December 22, 2020 Author Report Share Posted December 22, 2020 I'll give it a shot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.