Lotussuper7 Posted December 23, 2020 Report Share Posted December 23, 2020 I would love to see min/max dc clamp values available when using the gp PWM outputs. The reason for this is to limit the minimum duty applied to things such as fans, water pumps etc, as these often need a minimum duty to start properly, and table interpolation seems to effect this. Another Cherry on the top would be a 'kick' feature to temporarily boost duty to overcome stiction etc. It could include: Kick dc % Kick hold time in seconds Kick Decay time in seconds. Thanks in advance Davidv 1 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted December 23, 2020 Report Share Posted December 23, 2020 Looks like you want more than just a Min/Max DC as you still want to be able to use 0%DC in the table, might be better for us to implement a dedicated PWM Fan controller. Lotussuper7 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.