Adamw Posted January 13, 2021 Report Share Posted January 13, 2021 Load this map in, do a store, then shut ign off for 20sec to allow stepper to reset, then start it up and do another log of it idling. I suspect the base position table will need a bit of work before it is right. New idle 13-01-2021.pcl Quote Link to comment Share on other sites More sharing options...
AJ 2JZGE-T Supramkiv Posted January 13, 2021 Author Report Share Posted January 13, 2021 https://1drv.ms/u/s!AiywGJjfe4NwgygJtZM3IjtTJ9gD?e=pifMF7 new idle log https://1drv.ms/u/s!AiywGJjfe4NwgyngoD_OVImlplxk?e=gq8SQf https://1drv.ms/u/s!AiywGJjfe4Nwgyr-nU1Rey3KWZal?e=CaaDRe Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 13, 2021 Report Share Posted January 13, 2021 Why did you change all the idle settings I set up in the map and give me a log of nothing relevant? I feel like Im wasting my time here. Quote Link to comment Share on other sites More sharing options...
AJ 2JZGE-T Supramkiv Posted January 13, 2021 Author Report Share Posted January 13, 2021 The first log is with your idle settings. I changed them to stabilise and sent file so you knew Second log is with those. Trying to give you a couple of logs to see how it's behaving with the 2 conditions Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 13, 2021 Report Share Posted January 13, 2021 The map I attached above has the idle in closed loop mode, both of the logs you attached show the idle was in open loop mode. So neither log appears to have been from an ecu running my map without changes. Can you please load in the map above and do a fresh log. Make sure you turn off the ignition for a few second before starting after loading the map so the stepper resets to the home position. Im still not convinced this idle valve is working from these logs but please do as requested above so I have some data to work with. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.