Phil2JZ Posted January 11, 2021 Report Share Posted January 11, 2021 I have an S15 with a 2JZ conversion, ive installed a Bosch 82mm DBW and 350z accelerator pedal with sensor. Ive bought the plugs and pins for both sensor and wanting to know what cable to purchase, if I need to use SHEILDED or TWISTED pairs etc? I just don't want any issues with noise etc 6 cores are needed per sensor Thanks guys Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 11, 2021 Report Share Posted January 11, 2021 None of it needs to be shielded or twisted. Most people would generally just use single wires twisted into a nice bundle, rather than jacketed 6 core cable, but that would be fine if you find something suitable. 20AWG or 0.5mm2 is fine for the TP, AP, 5V and sensor ground pins. Use 18AWG or 0.75mm2 for the Motor +/-. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.