Haltech IC-7 Odometer issues

[AbbeyMS]

I have a IC-7 on a R32GTR , we have changed the speedo (odometer) drive from Cable to electronic using a 33GTR sensor , can make everything work speed on the dash speed will only work using RR Wheel speed -gear position works using either LR or RR but cant get the Odometer to work, seem the Haltech dash uses LR  speed that is used for Odometer to be driven.

I have doubled up the input for RR and LR with Di3 where the speed  signal is inputted 

Any one else got the Odometer working on and IC-7 dash with a Link G4X ECU

 

Thanks

 

MAP 10 SEMI CLOSED LOOP.pclx

[Adamw]

I think Haltech should be the best to ask for this.  If speed is showing on the dash then it should be able to calculate distance.  

[Brockharro]

Hey abbey how did you get on getting the odo to work 

[AbbeyMS]

On 4/3/2022 at 5:16 AM, Brockharro said:

Hey abbey how did you get on getting the odo to work 

Its was a issue with the Haltech Dash that Haltech sorted, something happening in the code

 

[Turbo.Tim]

For anyone that is having issues with this I was able to sort it out on my Evo 8.  The haltech was expecting the signal from the rear left wheel speed sensor on Link ECU's. 

It looks like the default is set to LF wheel speed.  I switched this function to LR and now my odometer and trip works. 

[AbbeyMS]

The issue I had was in the code Haltech had updated something but it had caused other issues.