Jump to content

Xtreme and sequential gearbox.

Recommended Posts

Any analog input is fine for the gear position pot.  You assign the input and calibrate the voltages in >Chassis and body>Gear detection.  Set the gear detection mode to Analog position sensor.  

Configuration of the gear shift cut and blip is done in >motorsport>gear shift control.  There are basic guidelines in the help file but gear shift control needs significant experience to set up and tune so I cant really cover that here, I would be writing for a week...  I suggest you read the help and work through the set up yourself and ask questions when needed.

Link to post
Share on other sites
  • 2 weeks later...

NZEFI have them custom made and I assume with a large MOQ.  I havent seen anyone else stocking anything similar.  

You could buy a generic USB bulkhead connector and fit your own LTW plug to the ecu end, but it wont be nicely overmoulded etc like these ones.

For example: https://www.aliexpress.com/item/4000205751489.html

Link to post
Share on other sites
  • 1 month later...
On 6/22/2017 at 4:31 AM, Adamw said:

Ok, I just probed my tuning cable, that pinout above is wrong.  Here's what I get:

Pin 1 = USB GND

Pin 2 = N/C

Pin 3 = D+

Pin 4 = D-

Pin 5 = VCC

Pin 6 = Shield (the metal case on the USB plug)


Also be careful where you get your pinout from as I noticed when looking up the USB pinout on google many images have the D-/D+ swapped over.  My numbering above is based on the pinout below that I have marked "correct". 





So I finally recieved that aliexpress cable, welded the amphenol AU-06BFFA-LL7001 and it connects well to the ecu. spot on

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...