Jump to content

Honda K24 Link Monsoon


Ryan21
 Share

Recommended Posts

Thank you. I found that basemap. In the ecu layout it says there is only two triggers being used. The k series has 3 trigger type sensors, 2 cam and 1 crank. How would I know which cam sensor to use? Or is there a way to use both? 

Link to comment
Share on other sites

The base map shows exhaust cam connected to trigger 2 and inlet cam connected to DI1.  There is wiring info in the help file, I will attach below.  If you are using a factory loom you will need the relay for the vtec solenoid as shown in the diagram below (since factory ecu switches 12V side), if you are making your own loom then you can do it without the extra relay, connect it direct to an aux output and the other side of the solenoid to +12V.    

Oh, be aware also, Im pretty sure the K24 crank sensor pinout is different than the K20, so you need to research that yourself.

DdtvPbA.png

 

 

Link to comment
Share on other sites

On 2/15/2021 at 9:34 AM, Adamw said:

Oh, be aware also, Im pretty sure the K24 crank sensor pinout is different than the K20, so you need to research that yourself.

That's correct they are different.

Also the K20a from the Accord Euro R (CL7) runs the K24 connector and pinout, I would guess the FD2 K20a might also as it's based of the CL7 engine originally.

Taken from the Haltech K20 page...

image.thumb.png.0db06b1de597569e8a1e5dc01495642e.png

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...