Electredge Posted March 22, 2021 Report Share Posted March 22, 2021 I've noticed the following tables I cannot change the axis data points. crank enrich table crank hold table post start enrich table post start hold time table post start decay time table Is this some kind of glitch? or is this on purpose? Thanks Jon Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 22, 2021 Report Share Posted March 22, 2021 It is by design. Many of the small tables that almost every user will need and usually dont need much variation from the default axes are done this way as user configurable axes increases the processor load significantly as the interpolation gets much more complex. This is why there is a limit of 45 GP tables. If you want configurable axes on any of these functions you need to turn on the 3D option. Those 2 related tables will then become part of your 45 GP table allowance. Quote Link to comment Share on other sites More sharing options...
Electredge Posted March 22, 2021 Author Report Share Posted March 22, 2021 thank adam, that makes sense I was just trying to make the table smaller. for crank enrich and post start enrich it seems to have very small gaps between the temps, which makes the table very long. especially the 266 and 284 degree temps which hopefully the cars will never see :D... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.