Camal Posted March 22, 2021 Report Share Posted March 22, 2021 Hey @Adamw I thank you for all assistance so far the machine is working fine, the gear outputs has been all calibrated and functioning , I just got one last question to ask... I am using a universal dash that has a 1 wire input to receive water temp signal , however the sensor the link uses has two , is there a output that will allow my dash to see water temps from the link ecu. If so plz expand on it thanks. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 22, 2021 Report Share Posted March 22, 2021 You can try connecting an aux output (Aux 1-8) to the temp gauge wire. Set up the aux output as a GP PWM and then experiment with the GP table to make the gauge read correctly. Example here: Quote Link to comment Share on other sites More sharing options...
Camal Posted March 22, 2021 Author Report Share Posted March 22, 2021 Thanks much again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.