drew smith Posted April 1, 2021 Report Posted April 1, 2021 I have installed a ht010306 sensor in a vipec v88 and wired to antemp but the issue I am having is the calibration is totally off.. I was wondering if someone has one for this sensor on the vipec? It's weird because both haltech and the vipec both run a 1k pullup so it should work Quote
Adamw Posted April 1, 2021 Report Posted April 1, 2021 That cal looks very odd for a PTC sensor so I suspect it is not accurate. You might be best to test in ice water (0c), room temp (20c) and boiling water (100C) yourself. The 1V voltage change for 180deg temp change is not going to give great resolution either. Quote
drew smith Posted April 4, 2021 Author Report Posted April 4, 2021 Yeah ok they work absolutely perfectly on a haltech have done multiple with no issues. Abit of a pain to so this in a customers car Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.