jamie Posted April 14, 2021 Report Share Posted April 14, 2021 hey all, trying to figure out if the link monsoon can run a K24A3 i-vtec with a turbo setup. i bought the monsoon about 2 years ago. i hear they dont have enough inputs and outputs?? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 The K24A3 as far as I know has the 3 lobe Ntec cams with VVT as well - like a K20A. A Monsoon should do this fine if you only need the basics (assuming it has cable throttle). The Monsoon has 6 aux outputs, so for an NA engine you would use do something like this: VVT solenoid Vtech solenoid Idle valve Fuel pump Fan Tacho. So none spare for say boost control, but there are a couple of ways you could free up a couple. You could wire the coils wasted spark which would give you two ignition drives spare that you can use for auxes - or you can just have the fuel pump run all the time or use a temp switch for the fan. JeremiahJ 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.