434josh Posted April 24, 2021 Report Share Posted April 24, 2021 I am looking to add a 6 position switch to increase boost on the fly. Trying to make sure im on the right track here. https://www.dropbox.com/s/fxn9uo2mgps58dl/boost sw.PNG?dl=0 https://www.dropbox.com/s/4lbrnwiu5ydg5ej/Barra boost sw.pclr?dl=0 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 24, 2021 Report Share Posted April 24, 2021 I would do the cal table a bit different, see below. The cal table converts the 0.5-4.5V input into "switch positions 1-6". The boost ratio table gives us 0% table 2 in position 1 increasing to 100% table 2 in position 6. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.