CoreyBary Posted April 27, 2021 Report Share Posted April 27, 2021 Hey guys I'm wiring an old g1 in to a Honda Civic Ek single cam non vtec, it has the obd2 distributor with the 7 pin flat plug. I'm just wondering which wires get wired in to the g1 plug and what terminals they go to? Any help will be appreciated Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 28, 2021 Report Share Posted April 28, 2021 Do you know what trigger sub-board your ECU has in it? Attach a picture with the lid off if not. Also a pic of the trigger inside the distributor would be helpful. Quote Link to comment Share on other sites More sharing options...
CoreyBary Posted May 8, 2021 Author Report Share Posted May 8, 2021 Hi Adamw, thanks for the reply. Ill attach pics of both Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 8, 2021 Report Share Posted May 8, 2021 That ecu has a Nissan 360 sub-board in it so is not suitable for the Honda distributor, it is built for a SR20 or similar. Link could possibly replace the sub-board with one that matches your distributor if they have one in stock, but there will be a cost associated with that. You will have to email [email protected] to see if that is possible and the cost to do so. Quote Link to comment Share on other sites More sharing options...
CoreyBary Posted May 8, 2021 Author Report Share Posted May 8, 2021 Aah yup no worries thanks for that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.