k fuku Posted April 29, 2021 Report Share Posted April 29, 2021 テーブル軸を0から4まで細分化した場合に割り当てられたAUXの使い方がわかりません。 通常の0と1の使い方はわかるのですが、例えばvirtualAUXで3や4を指定したい場合はできるでしょうか? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 29, 2021 Report Share Posted April 29, 2021 the Ign 4 status has 4 states, they are: 0 = Inactive 1 = Active 2 = Off 3 = Fault typically you would only use Inactive and Active for this particular status, the Off status only occurs when the output is not assigned to any function and I don't think the fault status is used on this particular runtime. What exactly are you trying to do? Quote Link to comment Share on other sites More sharing options...
k fuku Posted April 29, 2021 Author Report Share Posted April 29, 2021 1 hour ago, Vaughan said: the Ign 4 status has 4 states, they are: 0 = Inactive 1 = Active 2 = Off 3 = Fault typically you would only use Inactive and Active for this particular status, the Off status only occurs when the output is not assigned to any function and I don't think the fault status is used on this particular runtime. What exactly are you trying to do? I would like to switch between three types of lambda target overlay tables. 1) Normal 2) Water Methanol Injection 3) For eco-drive Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 29, 2021 Report Share Posted April 29, 2021 attach a copy of your tune and I'll see what I can do Quote Link to comment Share on other sites More sharing options...
k fuku Posted April 29, 2021 Author Report Share Posted April 29, 2021 1 hour ago, Vaughan said: attach a copy of your tune and I'll see what I can do Thank you for your cooperation. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 29, 2021 Report Share Posted April 29, 2021 how are you currently telling the ECU which of those 3 modes you want to use? like this? DI2 inactive = normal mode DI2 active = water meth mode throttle < 16% & wheel speed between 35-80kph & DI2 inactive = eco mode Quote Link to comment Share on other sites More sharing options...
k fuku Posted April 29, 2021 Author Report Share Posted April 29, 2021 14 minutes ago, Vaughan said: how are you currently telling the ECU which of those 3 modes you want to use? like this? DI2 inactive = normal mode DI2 active = water meth mode throttle < 16% & wheel speed between 35-80kph & DI2 inactive = eco mode DI2 inactive = normal mode This is the basic lambda table (DI2 active = water meth mode) Lambda target overlay switching is currently set to this. (throttle < 16% & wheel speed between 35-80kph & DI2 inactive = eco mode) I'm hoping to be able to change the lambda target in conjunction with this as well. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 30, 2021 Report Share Posted April 30, 2021 Something like that should give you 3 modes as specified. 1 = DI2 inactive and VAux4 inactive 2 = DI2 Active 3 = DI2 Inactive and VAux4 Active k fuku 1 Quote Link to comment Share on other sites More sharing options...
k fuku Posted April 30, 2021 Author Report Share Posted April 30, 2021 1 hour ago, Vaughan said: Something like that should give you 3 modes as specified. 1 = DI2 inactive and VAux4 inactive 2 = DI2 Active 3 = DI2 Inactive and VAux4 Active Thank you! That was helpful. Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.