ATSMOTORSPORT Posted May 7, 2021 Report Share Posted May 7, 2021 Hello !! I have a Link Fury X ECU in order to manage an VR6 3.2 engine (is the one which have just one intake camshaft and one exhaust camshaft) with VVT. We are using the Trigger 1 as a Reluctor to read the Engine Speed with a 60-2 wheel and the Trigger 2 as a Hall sensor in the Intake Camshaft. To configure the Triggers, we have made it as indicated in the help, with the Trigger Mode set to Holden V6 Ecotec VVT. Right now, the VVT SetUp is set to OFF because we just want to crank the engine. The problem that we have is that when we try to crank, there is no spark in the spark plugs. We have seen that the Camshafts sensors are in the left part of the car in the VR6 and they are situated on the right side of the car in the Holden V6 engine. Is there anyone who has a configuration that works in a Link for this VR6 engine ??? I add pictures of the trigger Scope and from the configuration. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 7, 2021 Report Share Posted May 7, 2021 Your crank sensor is wired incorrect polarity, swap the +/- wires on the crank sensor and it should then work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.