Murg_e30 Posted May 14, 2021 Report Share Posted May 14, 2021 I need some help for setup LS3 DBW 90 MM (picture1) With Fury X ECU . It can be use setup and wiring like in the picture2 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 14, 2021 Report Share Posted May 14, 2021 Yeah as far as I know they all share the same pinout. Some basic throttle and idle settings from our LS race car below that will probably be a decent starting point. This one needed a lot of dashpot offset to stop it stalling, I assume due to the big plenum. Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted May 16, 2021 Report Share Posted May 16, 2021 LS2 is a silver blade, and on the OEM can be problematic over time, and are pretty much unavailable. They were only used for a short run LS3 used the gold blade, which is readily available. Quote Link to comment Share on other sites More sharing options...
Murg_e30 Posted May 16, 2021 Author Report Share Posted May 16, 2021 On 5/15/2021 at 4:07 AM, Adamw said: Yeah as far as I know they all share the same pinout. Some basic throttle and idle settings from our LS race car below that will probably be a decent starting point. This one needed a lot of dashpot offset to stop it stalling, I assume due to the big plenum. Thank you, I will try and report back 1 hour ago, Stevieturbo said: LS2 is a silver blade, and on the OEM can be problematic over time, and are pretty much unavailable. They were only used for a short run LS3 used the gold blade, which is readily available. Thank you for the information Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.