Jump to content

Table Setup - Parameter Selection Issue


barge
 Share

Recommended Posts

When I'm in the axis setup area for a table I have an issue that I can't select or change an axis parameter.

If I hit the button to select a new a parameter for an axis it acts like the window is open (dings if I try to do anything else). I have to hit esc to "close it" but I see no window and cannot select a parameter.

Link to comment
Share on other sites

Can you try moving you axis setup window across to one side of the screen before clicking the change parameter button? I suspect the parameter selection window might be coming up behind the axis setup window for you.

Link to comment
Share on other sites

On 5/19/2021 at 5:16 PM, Vaughan said:

Can you try moving you axis setup window across to one side of the screen before clicking the change parameter button? I suspect the parameter selection window might be coming up behind the axis setup window for you.

Yep, that's what it was. I tried doing this after hitting the change parameter button but not before. It's also now popping up in front when i'm not connected. Not sure if this is just a random windows type issue or what. I'll make sure to try it again connected to the ecu when I get back to swapping.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...