ykchong4 Posted June 6, 2021 Report Share Posted June 6, 2021 I've problem with connect 30-0300 Aem WB to the G4+ monsoon via CanBus. This AEM gauge use a DT4 pin (+12v,GRD,CANH,CANL) for the road tune purpose. The monsoon can't connect to AEM gauge at all, However this same aem gauge can connect and display Lambda in PClink with G4X Evo3 plugin with the same CanBus configuration. 120ohm terminal resistor wired between CANH & CANL near to the AEM gauge. G4X evo3 plugin.pclx Nissan S14-15 G4+ Monsoon.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 6, 2021 Report Share Posted June 6, 2021 Two problems, 1. Mode needs to be set to receive user stream 1 - not transmit. 2. Divider should be 10, not 100. Quote Link to comment Share on other sites More sharing options...
ykchong4 Posted June 7, 2021 Author Report Share Posted June 7, 2021 thanks, working now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.