Rms Posted June 9, 2021 Report Share Posted June 9, 2021 HI everyone. Can anyone tell me if there is a option on the g4+ to limit start time on my dry sump build to not allow car to start to it detects a set oil pressure. ? Quote Link to comment Share on other sites More sharing options...
Monsterbishi Posted June 9, 2021 Report Share Posted June 9, 2021 Can't tell you if there's a built-in feature specifically for that, at a pinch what about running a relay and a conditional virtual aux that doesn't let the injector circuit energise until there's xxx oil pressure? Rms and Fwdmn 1 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 9, 2021 Report Share Posted June 9, 2021 Do it as part of your normal Oil pressure safety, but set the startup lockout to 0 so it is also working during startup (with road cars usually you dont want it to limit during starting). Suggest fuel cut so you dont flood it. Example below wouldnt allow the engine to start until 30kpa oil pressure was seen (0 RPM limit). dx4picco, Rms and essb00 2 1 Quote Link to comment Share on other sites More sharing options...
Rms Posted June 10, 2021 Author Report Share Posted June 10, 2021 Thanks Adam. I will give that a try Quote Link to comment Share on other sites More sharing options...
koracing Posted June 10, 2021 Report Share Posted June 10, 2021 Another possibly way would be to use a virtual aux on the stop switch function which would disable fuel and ignition until your logic was met. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.