plox Posted June 30, 2021 Report Share Posted June 30, 2021 I managed to get hands on some slightly older gear. Displaylink featured in this: and a G4 knockblock. I can't find a links to any older manuals on the website, minimal reference in the help file to "knockblock" and appears some of the links that have been posted in the past are broken, would anyone be able to advise? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 30, 2021 Report Share Posted June 30, 2021 Manuals attached. DisplayLink Manual.pdf KnockBlock G4 Manual.pdf Quote Link to comment Share on other sites More sharing options...
plox Posted June 30, 2021 Author Report Share Posted June 30, 2021 Legend, cheers! Quote Link to comment Share on other sites More sharing options...
plox Posted July 18, 2021 Author Report Share Posted July 18, 2021 Another question, it only came with one knock sensor loom/lead, do you know what the connector is that plugs into the knock A & B (or if they are still for sale) I've been searching but no luck. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 18, 2021 Report Share Posted July 18, 2021 I dont have any officical information that I can find, and we no longer have any stock, but just from eyeballing it my guess is a Micro Mate-N-Lok. Check pin spacing should be 3mm. Try part number 794617-2 Quote Link to comment Share on other sites More sharing options...
Lotussuper7 Posted July 19, 2021 Report Share Posted July 19, 2021 On 6/30/2021 at 3:03 PM, plox said: I managed to get hands on some slightly older gear. Displaylink featured in this: and a G4 knockblock. I can't find a links to any older manuals on the website, minimal reference in the help file to "knockblock" and appears some of the links that have been posted in the past are broken, would anyone be able to advise? I have a display link running on a g4x. It works, but in my opinion was never realy polished. Some functions are very limited, and other streamed values dont show properly. With a bit of fiddling in the Can menu you can get most things working properly. Ie. I had temps showing incorrectly, decimal places in the wrong place etc. Hopefully you have some luck with it, I remember the amount I payed for it, but would like to forget. As for the knock block, that plug looks like a pc power supply connector. Quote Link to comment Share on other sites More sharing options...
plox Posted July 20, 2021 Author Report Share Posted July 20, 2021 On 7/19/2021 at 11:09 AM, Adamw said: I dont have any officical information that I can find, and we no longer have any stock, but just from eyeballing it my guess is a Micro Mate-N-Lok. Check pin spacing should be 3mm. Try part number 794617-2 Sweet I'll give that a go and report back here to confirm 16 hours ago, Lotussuper7 said: I have a display link running on a g4x. It works, but in my opinion was never realy polished. Some functions are very limited, and other streamed values dont show properly. With a bit of fiddling in the Can menu you can get most things working properly. Ie. I had temps showing incorrectly, decimal places in the wrong place etc. Hopefully you have some luck with it, I remember the amount I payed for it, but would like to forget. As for the knock block, that plug looks like a pc power supply connector. I got it as part of a package and the dash was more of a bonus that I'll sell at some point. Mates going to test it in his car I've ordered a GaugeArt Can Gauge Lotussuper7 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.