danh Posted July 3, 2021 Report Share Posted July 3, 2021 Hi folks, Im after some pointers as to the best Link ECU to run the 3rd gen v10 out of a truck...? Thanks in advance, Dan Quote Link to comment Share on other sites More sharing options...
koracing Posted July 8, 2021 Report Share Posted July 8, 2021 You'll have to run the engine in semi-sequential as the link ecus only have up to 8 injector drivers and 8 ignition drivers. There is no link that will run fully sequential 10 cyl odd fire, nor will it detect knock per cylinder on 10 cyl as far as I know. As far as which ecu you would want to use - I would use XtremeX, FuryX, or the Thunder. I have a personal project with a gen3 SRT10 viper v10 out of a pickup installed in a 72 dodge van that we are running a MoTeC M150 on so that I can do full sequential ignition, injection, and knock detection per cylinder (as well as automatic transmission control with custom firmware). It's currently on the back burner, however. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.