Vehicle Theft Prevention

[keizsr]

　Vehicle Theft Prevention

For example, using a brake switch that requires a specified number of strokes within a specified time to activate the fuel and ignition?
　
It would be nice to have a simple trick.

Can you do that using Virtual Auxiliary Outputs?
 

[Vaughan]

You can do any manner of weird things in G4X using Mathblocks, timers and GP Outputs which you could use as the AntiTheft Input.

[keizsr]

Mr. Vaughn.

It's configurable. I wasn't aware of that.

But I'm still having trouble understanding the settings.

[Vaughan]

Which generation of ECU do you have (G4+, G4X etc) and what exactly do you want your theft prevention process to be?

[keizsr]

 

Mr. Vaughn.

I use g4xstorm. A car without security. We assume that the key syringe has been forcibly activated.

For example, when the key switch is turned on (ecu on)
→ within 10 seconds → brake switch (or newly installed hidden switch) 5 times → can start.　

Without that operation, fuel and ignition will not be available even after cranking.　

Note that the number of seconds and times can be set freely.

This alone will prevent some damage.

[Vaughan]

I'm sure it can be done more efficiently than this but here is an example of how you can do the above

[keizsr]

Mr. Vaughn.

Thank you. I'll set it for a holiday and check it out.　

[keizsr]

Mr. Vaughn.

I wired up the brakes and set it up.
It's working fine.　

Only set to 5 brakes.

Set swcond1 of gp output1 to =

But it will start even if it's more than five.

Is there another setting?　

[Vaughan]

will only start if number of brake presses is exactly 5 at some point between 9 and 10 seconds

[keizsr]

Mr. Vaughn.

I've changed the setting and confirmed that it only starts at the specified number of times.

After that, I changed the time and frequency, and was able to confirm that it started at a time and frequency that I was comfortable with.

　Thank you for everything.