Jump to content

g4+ monsoon support knock sensors?


Recommended Posts

  • 1 year later...

Does the Monsoon X support a knock sensor directly wired into it? I note that DI 4 can be used for knock or a DI but do you need an external module to allow it to work or is it on board? The LINK website states that the Storm X has on board knock control being the advantage over the Atom X and Monsoon X. If the Monsoon X doesn't have on board and requires an amplifier, what product would be required to wire into the ECU and knock sensor? I note the Knock Block is a stand alone tuning tool that does not interface with the ECU at all.

Advanced features not found on the smaller Link ECUs (AtomX and MonsoonX):

Onboard Knock Control – support for two knock sensors wired directly to the ECU.  No external amplifier required.

EDIT: It seems this post here confirms that from board revision 3.0 it has knock control built in. The ECU we are using for the project is 3.1.


Edited by GDII
Found the answer
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...