MarcG Posted September 1, 2021 Report Share Posted September 1, 2021 I am in the process of installing the pnp e36 ecu onto my m50b25nv. I have repined my engine loom to suit the pinout of the link ecu. The last thing I need to do is the cam position sensor which on my motor is a VR sensor compared to the m50tub25 which had the Hall sensor. So my question is, do I run the Vr sensor signal to pin 17 and sensor ground to pin 44? any help is much appreciated. Cheers. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 1, 2021 Report Share Posted September 1, 2021 I replied to your PM yesterday with the same question. Yes, cam signal to pin 17, cam ground to 44. Quote Link to comment Share on other sites More sharing options...
MarcG Posted September 1, 2021 Author Report Share Posted September 1, 2021 Hi Adam, sorry link wouldn’t work, all I could see was that you replied. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.