Jump to content

Vipec Wrx V1-2 Ecu Question


scifisubi
 Share

Recommended Posts

I have a Vipec WRX V1-2 Ecu in the 11xxx serial range.  PCB Rev 1.2.  I am looking at one of these gauges:

https://store.perfecttuning.net/product/universal-gauge-for-vi-pec-linkecu-g4-g4/

I've read through the documentation on the pc link cable and I didn't see this specific topic posted elsewhere in the forum.  My question is, can my ecu run canbus to the gauge and data log from the usb to the pc at the same time?  It sounds like there may be limitations on what can be done, but I wanted to double check.

 

Thanks for the help!

Link to comment
Share on other sites

Yes, CAN is fine with PC Comms at the same time.  You just need to make sure only the CAN H/L pins in the 6 pin connector have wires connected to them.  Use the bare CANF plug and solder your own two wires in is the best option.  Dont use the old CANDASH cable which also has the serial wires connected as this will interrupt PC comms.  

dtIfKBA.png

https://dealers.linkecu.com/CANF_2

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...