Jump to content

TCI Auto Canbus


Doig
 Share

Recommended Posts

Hey I have almost finished wiring up a G4X Storm ECU to a chevy with a LT1 engine and trans, the engine is sorted but am trying to connect the ecu to the transmission ecu through canbus but I have no information on setting it up for this ecu

TCIAUTO 301002

I know it requires a TPS, engine speed and Map signal and would rather not tee into the new engine harness.

Any help would be great

Link to comment
Share on other sites

It looks like this device is only designed to talk to FAST XFI ecu's, I have never seen the FAST XFI CAN published anywhere.  You could try contacting them to see if they are forthcoming with that info, but I suspect like Racepak and Holley they will keep it close to their chest.  

Link to comment
Share on other sites

I have since found out that it is only setup to talk to fast xfi type ecus, they only seem to have 1 version of can bus across all ages of trans ecu's so was wondering if it would be the same as the protocol aim or haltech use in there dashes? Would there be a way of getting the link ecu to send this data that the dashes are used to receiving somehow?

I do have a old laptop with the tciauto software on it to check any signals being sent.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...