Add Closed Loop Lambda Average to Mixture Map

[jdniss]

Is it possible to add the Closed Loop Lambda average, or calculated CLL percentage to the Mixture Map function?

I suspect with the CLL function enabled,
any calculated AFR Errors displayed in the Mixture Map are values that have already had CLL percentage applied;

Meaning that a cell that may read to be 1-2% rich or lean in the Mixture Map, were in actual fact up to 10% rich or lean - depending on configured CLL settings - prior to the CLL change being applied?

Or is this reserved for the Long Term Trim functions, not available in G4+?