TeodorM Posted January 20, 2022 Report Share Posted January 20, 2022 Hi, I just bought a GlowShift wideband gauge and I'm wondering how to connect it to the G4+ It only has two wies in the data ogging cable. Quote Link to comment Share on other sites More sharing options...
Confused Posted January 20, 2022 Report Share Posted January 20, 2022 Looking at the manual (https://www.glowshift.com/instructions/7-Color-Series/GS-702DL-WideBand-Datalogging-Gauge.pdf) it seems to be: Brown: 0-5v signal wire Black: Reference ground So - connect black to a Sensor Ground wire on the G4+, and the Brown to any spare Analog Input (in the example below, I have used AN Volt 9. For your chosen Analog Input, set the function to Lambda 1, and for Calibration, it seems to be 0v = 10.01 AFR/0.683 lambda, 4.99v = 20.00 AFR/1.365 lambda You can use the Cal 4-6 for this: Quote Link to comment Share on other sites More sharing options...
TeodorM Posted February 3, 2022 Author Report Share Posted February 3, 2022 Thanks, I will try that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.