Jump to content

Z32 plugin on RB25 knock sensors


Recommended Posts

Does the G4X z32 plugin use both knock sensors ? gonna be installing on my rb25 and updating the sensor to bosch donut style ones


also what is the best way to go here : changing pins on coils and injectors or changing the firing order in the ecu for the z32ecu to RB25 engine

Link to comment
Share on other sites

There is only support for a single knock sensor on the 300Z plug-in, Pin 23.

Change the wiring so the the correct RB firing order is setup in the software.  This is so any individual cylinder trims, knock control etc are assigned to the correct cylinder number.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...