T Martin Posted April 3, 2022 Report Share Posted April 3, 2022 so I've brought this ecu for my 1ggte. from what I know it was set up with single turbo etc. I need some help with identifying which variant of link this is before I order a new plug and pin out kit. 17 pin plug looks to have a boost control input as well. is there a diagram for what goes where with this set up? also have a link igniter which I need some direction or sourcing some wiring for. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 4, 2022 Report Share Posted April 4, 2022 Ill tag @Simon that might know more than me. But both the trigger board and main processor are quite uncommon ones. I suspect it might be hand controller tuneable only (not laptop). Quote Link to comment Share on other sites More sharing options...
Simon Posted April 4, 2022 Report Share Posted April 4, 2022 Yep hand control only and all geared to suit the 7MGTE Toyota. Its likely to not have boost control as that out put will be assigned a tacho on a wasted spark 6 cylinder. I would suggest it is a much better decision to look for a G3 unit at the minimum as that one really is past its use by date. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.