Jump to content

4age 20v stock Sensor calibration help.


CSHENG

Recommended Posts

Greetings, i have an issue regarding calibration of IAT, ECT and MAP sensor.

As i connects the ECU to my laptop, i got this 2 code error code 46 and error code 43.

i also noticed that the calibration table for IAT, ECT and MAP sensor was pre-selected for k20 temp sensor.

Question is which calibration table should i select .

note: i have tried TPS calibration , seem to be fine.

Engine = 4age 20v, stock ECT, IAT, and stock MAP sensor. 

ECU = Link g4x atom ii.

ECU harness was built from a 2.5m link g4 harness.

all the sensor wire was install with the harness tags.

attachment added, kindly refer 

Screenshot (268).png

Csheng4age20v.pclx

Link to comment
Share on other sites

16 hours ago, Adamw said:

ECT and IAT should use the Std Bosch NTC calibration I would expect.  MAP sensor will need a custom cal.  Try something like below.

7QoS93k.png

i have made a correction for Temp sensor and MAP sensor. attached the result as attachment below

it seems that the An temp sensor Error high have default setting of 0V. Now i put a 5V for the error high is that alright ?

MAP sensor cal table.png

Iat corrected.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...