KennyJ Posted May 11, 2022 Report Share Posted May 11, 2022 Hi , about to setup a GTR G4 into S13 CA , seems that would work , need to swap 2 inj and 2coil wires around and change to 1342 was setting up the in and out , what is the onboard map ? is it anvolt1 like modern Link ecu's ? couldnt find the manual online , only G4+ and G4X Quote Link to comment Share on other sites More sharing options...
KennyJ Posted May 11, 2022 Author Report Share Posted May 11, 2022 found the coil setup: ecu only has 3 ignition outputs so i shared 1 + 4 en 2 + 3 on ign 1 and 2 left 3 open , put in a custom TDC and it runs also : when setting the ecu to 4 cil setup it refuses tot fire the last output , bit weird took me some measuring to find that out now to look into the injectors Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 11, 2022 Report Share Posted May 11, 2022 9 hours ago, KennyJ said: found the coil setup: ecu only has 3 ignition outputs so i shared 1 + 4 en 2 + 3 on ign 1 and 2 left 3 open , put in a custom TDC and it runs Shouldnt need custom TDC, just set ign mode to wasted spark. Ign 4 output isnt connected on the storm based GTR plug-in. MAP sensor is ANV1. Injectors shouldnt need any special setup, all 8 injector drives are available. Quote Link to comment Share on other sites More sharing options...
KennyJ Posted May 12, 2022 Author Report Share Posted May 12, 2022 thanks for confirming Adam. for anybody in the future: it works perfectly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.