hurtinit Posted June 3, 2022 Report Share Posted June 3, 2022 Hi All.. I have a link g4x plugin with a Haltech IC-7 dash using the Can Lambda control module with both the Wideband and IC-7 Dash on Can 1. For the life I me.. I cant get the dash going.. Wideband works fine. Ive done a heap of searching but cant find any answers... Could somone have a look at my tune and see what im doing wrong?? Appreciate all the help in advance tuned Mike g4x rb26.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 3, 2022 Report Share Posted June 3, 2022 Moved to G4X forum. Your ECU setup is correct. You may notice the haltech help file shows "transmit DisplayLink", this is exactly the same as "Transmit Generic Dash" so that is ok. Unfortunately I dont have much experience with the Haltech dash to offer much help with that end - did you do the "load defaults" in the beginning? Did you do the wiring yourself or using Link or Haltech cables? Beaware the DTM4 pinout is different between Link & Haltech so that catches a few out. Quote Link to comment Share on other sites More sharing options...
hurtinit Posted June 3, 2022 Author Report Share Posted June 3, 2022 HI Adam, Thanks for your reply.. Yes on the IC7 I "load defaults" Link G4 yes I purchased the Link cables (didnt make my own). I managed to solve the issue with your help... I didnt know about the DTM4 pinout difference between the link and haltech cables. For those who are having a similar issue.. on the Haltech plug that goes into the back of the IC7, swap the High Low Can connections. As always Adam.. appreciate your help and guidance. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.