666_180sx Posted June 7, 2022 Report Share Posted June 7, 2022 I have a G4 RX running with a haltech dash working perfectly over canbus. The problem I'm having is I also have an AIM SOLO2 DL that I'd also like on the canbus. The haltech dash receives on address 1400 but the AIM SOLO2 needs to receive on address 1000. I cant transmit the link generic dash stream on 2 different channels with different addresses due to limitations of the canbus on G4 RX. I've tried creating a custom can protocol in the racestudio software (attached to this post) but some channels dont work at all and the others flash erratically. Any help would be much appreciated. Revolution Engines_Custom - Peter F_@20220527_233655_003809.xc1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 8, 2022 Report Share Posted June 8, 2022 Try this one, it should be mostly right. You may have to change the Lambda 1 & 2 units to AFR instead of lambda but I think the rest will be ok. You can delete the last frame also if you like. LINK_Generic_ID1400_@20220608_004622_005136.xc1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.