B-Shine Posted June 20, 2022 Report Share Posted June 20, 2022 Hi, Does someone have the custom CAN stream for my AIM MXS display. We use a Link Fury G4+ with a KMS EGT-CAN convertor. Kind Regards Bart van Schijndel Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 20, 2022 Report Share Posted June 20, 2022 Can you give more detail about what you want to do? Do you want EGT's displayed both in the ecu and dash? Quote Link to comment Share on other sites More sharing options...
B-Shine Posted June 20, 2022 Author Report Share Posted June 20, 2022 The EGT's are displayed in the ecu, i already configured this according to the manual. The only thing is the AIM can stream so I can display and log them. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 20, 2022 Report Share Posted June 20, 2022 Ok, if you attach your ECU and dash config I can set it up for you. If all 3 devices are connected to the same bus then I will only need the dash config. Quote Link to comment Share on other sites More sharing options...
B-Shine Posted June 21, 2022 Author Report Share Posted June 21, 2022 Hi, i've attached the files, dash config and the custom can protocol. 1988354736_MXSB-ShineSciroccoMK3Launch.zconfig LINK_Link AIM B-Shine_@20220512_124424_001800.xc1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2022 Report Share Posted June 21, 2022 Ok, you pretty much had it right, I just changed byte order to High to low and the data type to signer integer. I dont see much else wrong. Can you load this CAN stream to see if it works. LINK_B-Shine New_@20220621_075201_009399.xc1 Quote Link to comment Share on other sites More sharing options...
B-Shine Posted June 24, 2022 Author Report Share Posted June 24, 2022 Hi Adam, Everything works! Many Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.