Calvin Posted June 23, 2022 Report Share Posted June 23, 2022 Is it possible to use the 'Link G4X MR2Link V1 TST185' for the 4age silvertop? I have seen that they use the same connectors and they share a couple of pins. e.g. power, ground, injectors etc. Or do I just get a wire-in ecu and rewire the harness. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 23, 2022 Report Share Posted June 23, 2022 Either would be doable depending on your skill level. Both would probably be a similar amount of work depending how different the pinout is. The multilock connectors arent too difficult to depin and move wires etc. Just be aware there are two different sized pins in the same connector so you wont be able to for example move a small terminal to a position that originally had a big one if required (without chopping and crimping the correct terminal on). Quote Link to comment Share on other sites More sharing options...
Calvin Posted June 24, 2022 Author Report Share Posted June 24, 2022 Thanks for the advice. Quote Link to comment Share on other sites More sharing options...
koracing Posted July 27, 2022 Report Share Posted July 27, 2022 I'm not sure how close the silver top is to the black top - but the ST205X is closer in pinout to the Black top and is what I would recommend if you plan to rewire any way as it has more expansion capability than the ST185x. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.