Jump to content

Adding wideband knock sensors to Kurofune - 2JZGTE single turbo


Recommended Posts

Hi all, I have now got the car (JZS-161 aristo with single turbo) running on the kurofune albeit in desperate need of a tune which it will hopefully get next week. 

At the moment though there are no knock sensors wired in as I have upgraded to bosch widebands over the stock single wired ones.  

Where would i wire these into the kurofune? Is it on the connections at the front of the ecu as they are the only ones marked up as knock? Or can they go into spare signal pins at the back? 

If it is the front connector, does the ground go to the front as well, or sensor ground?

Many thanks

Kurofune knock.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...