randolph Posted October 7, 2022 Report Share Posted October 7, 2022 Hello Adam, this could be something i’m doing wrong, i’m having a bit of difficulty setting up cyclic idle, whereby the cyclic rpm limit is not behaving as it should, please check the attached file. the cyclic rpm limit is not activating properly when antilag is active, in runtime status the cyclic limit stays on 8000 although in the cyclic rpm limit it is 2000, thank you markus modelled dbw subaru.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 8, 2022 Report Share Posted October 8, 2022 I think I will need to see a log. Not sure why you are expecting cyclic to work when antilag is active, or if you just havent explained it well. Cyclic should only work when antilag is armed but is deactivated. Since you have DBW you wouldnt normally need cyclic idle. Quote Link to comment Share on other sites More sharing options...
Simon Posted October 9, 2022 Report Share Posted October 9, 2022 What you have is a ISC over ride of 10% throttle opening, The Cyclic idle is set to stop above 5% throttle so will never activate as throttle does not close to less than 10% Quote Link to comment Share on other sites More sharing options...
randolph Posted October 10, 2022 Author Report Share Posted October 10, 2022 Ok guys, thanks for your enlightenment, i saw my mistake. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.