Admiral Akhtar Posted November 28, 2022 Report Share Posted November 28, 2022 Hello, Just after some information on the configuration of compact version of the Continental/GM Flex Fuel sensor, In the Link Help files it advises to set the Active Edge to Falling for the old style large Continental sensors, which to my understanding are internally the same as the compact version. But the Link Flex fuel sensor which looks identical to the compact version advises setting the Active Edge to Rising? Just wondering if anyone is able to confirm which setting I should go with? Quote Link to comment Share on other sites More sharing options...
Timboj Posted November 28, 2022 Report Share Posted November 28, 2022 I'm using rising, with pull-up resistor 'on' too. Admiral Akhtar 1 Quote Link to comment Share on other sites More sharing options...
dx4picco Posted November 28, 2022 Report Share Posted November 28, 2022 Look at your fuel temp. If it seems Ok then edge is correct. If it seems unrealistic then change it and see if it's closer to reality Admiral Akhtar 1 Quote Link to comment Share on other sites More sharing options...
Admiral Akhtar Posted November 28, 2022 Author Report Share Posted November 28, 2022 5 hours ago, Timboj said: I'm using rising, with pull-up resistor 'on' too. I'll give that a go 4 hours ago, dx4picco said: Look at your fuel temp. If it seems Ok then edge is correct. If it seems unrealistic then change it and see if it's closer to reality Ah sounds like a plan, i'll be sure to check Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.