jrizing Posted November 28, 2022 Report Share Posted November 28, 2022 Hi, I've been trying to create a 3D deadtime time table but there seems to be a bug in the software. The fuel is setup for sequential/staged and issue is with the secondary injection deadtime table which is unavailable. The table is not present in the staging injection drop down menu but if you select 'staged injection' it is there but selecting it does nothing. I've tested this on an older version of PC Link (6.21.24) and it works fine. This issue is on the latest version 6.23.15. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 28, 2022 Report Share Posted November 28, 2022 Are you connected to an ecu or using a map that is from a recent firmware when testing this? I see there is a note in 6.22.44 that says "fixed secondary deadtime table visibility in settings menu", so I assume this was known and fixed. Im not at a pc now but will try to have a look tomorrow. Quote Link to comment Share on other sites More sharing options...
jrizing Posted November 28, 2022 Author Report Share Posted November 28, 2022 At the time I wasn't connected to the ecu. I'm currently at work but I will try it once I get home. Quote Link to comment Share on other sites More sharing options...
jrizing Posted November 28, 2022 Author Report Share Posted November 28, 2022 I've tried it connected to the ecu but still no joy. Quote Link to comment Share on other sites More sharing options...
aerace_fab Posted November 28, 2022 Report Share Posted November 28, 2022 I tested it as well and same issue. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted November 29, 2022 Report Share Posted November 29, 2022 Looks like I found and fixed this late October, will be in the next release Quote Link to comment Share on other sites More sharing options...
Evil_Rotary7 Posted May 20 Report Share Posted May 20 Also having the same issue on the latest version 6.23.15. Currently rolled back to PCLink G4X Ver: 6.22.38 and seems to work fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.