razzmtazz Posted November 29, 2022 Report Share Posted November 29, 2022 hi guys i have a link evo 3 plug in g4x in traditional it runs fine but as soon as i try to modelled it doesn't want to start cant figure out whats going on thanks for the help map is attached evo6 wasay 2.4.pclx Quote Link to comment Share on other sites More sharing options...
essb00 Posted November 29, 2022 Report Share Posted November 29, 2022 Your tune file is password protected. Quote Link to comment Share on other sites More sharing options...
Confused Posted November 29, 2022 Report Share Posted November 29, 2022 What have you changed to try to run it in Modelled Mode? This is a fundamental change, and requires reconfiguring a huge number of things, and retuning from scratch. You can't just enable Modelled Mode and expect it to work. Quote Link to comment Share on other sites More sharing options...
razzmtazz Posted November 30, 2022 Author Report Share Posted November 30, 2022 Password is razz123 I have put all the injector details engine etc Quote Link to comment Share on other sites More sharing options...
essb00 Posted November 30, 2022 Report Share Posted November 30, 2022 If you didn't also change the fuel table, then it won't work with modelled fuel equation mode -- as the numbers on the fuel table has to be VE (volumetric efficiency). Double all the values in your fuel table as you shift to modelled, perhaps it would be enough to make it start -- but you'll be having to tune the full fuel table again in modelled mode. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.