Piar Posted January 26, 2014 Report Share Posted January 26, 2014 Hi everyone! I'm have problems with etrottle map. I want to set one axe to be BARo correction but software don't let me to set numbers which are not in 90-110 range. It's problem for me because i have very low Idle in mountains where BAP are 0.75. Also I want ask you to add baro correction to Idle base duty and wasgate duty. It will be very usefull for me because in our area BAP vary from 0.75 to 0.95 Quote Link to comment Share on other sites More sharing options...
Simon Posted January 26, 2014 Report Share Posted January 26, 2014 Hi This happens to be in the pipe line. A future firmware will fix this. I will see about adding the options of idle and WG trims based on baro. Quote Link to comment Share on other sites More sharing options...
Piar Posted January 27, 2014 Author Report Share Posted January 27, 2014 Simon also can I Ask you to do custom log creation feature. I mean that it will be useful to create custom log based on logged data. Quote Link to comment Share on other sites More sharing options...
Simon Posted January 28, 2014 Report Share Posted January 28, 2014 The i series gives you the ability to select the channels and rates that you wish to log at. If that is what you are after? Quote Link to comment Share on other sites More sharing options...
Piar Posted January 29, 2014 Author Report Share Posted January 29, 2014 completely not! I mean I have logged X and Y parametrs then I want to calculate Z value which equal Z=X*X-Y/5( for example) It will be very useful when you want to calculate smthng special or when you forgot to log parametr which can be calculated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.