Michael - S13 Posted December 10, 2022 Report Share Posted December 10, 2022 Hey Guys, First time installing a Link g4x. car is a s13 sr20det, 2.2L stroker, big cams, g series etc. my issue is it wont start and run well on its own without any throttle input. if i hold throttle open just before it fires it runs great, but wont catch idle for first 15-20 seconds or so. If i start without throttle it almost sounds like its on 2 cylinders until it stalls out. once warm it drives great, revs great etc. ignition timing set and accurate, fuel pressure set and accurate. stock ignition system. i don't have a log file as im keeping running it to a minimum until i can get it on a dyno for run in etc. ill attach the current map. Running bosch 980cc injectors. Any Insight would be great, thankyou for your time. Latest Map 1012.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 10, 2022 Report Share Posted December 10, 2022 Would really need to see a log to be able to offer any suggestions. With no wideband however there will not be a lot of clues to work with. Have you tried adjusting the master fuel to see if adding or removing fuel helps? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.