Snora Posted December 13, 2022 Report Share Posted December 13, 2022 Gday stock engine. sensors calibrated. won’t run. 3 injection, and 6 ignition showing inactive. Thank you Quote Link to comment Share on other sites More sharing options...
Vaughan Posted December 13, 2022 Report Share Posted December 13, 2022 Copy of the basemap, PCLog of you trying to start it and a trigger scope while cranking please Quote Link to comment Share on other sites More sharing options...
Snora Posted December 15, 2022 Author Report Share Posted December 15, 2022 gday thank you for getting back, happy Thursday! no idea, i usually use ipad for everything. have read through a few how tos, but will have spend more time later. I can wire-in and tune my old ems stinger ecu no problem. could the wrong drivers have been installed to the g4x. the g4x manual needs some fine tuning...( page 13 note 2 add 'fuel main' between 'fuel' and 'fuel setup' ). together with the issue raised on my other topic, doesnt help with setting up. can i post it back to golbeys parts and get it reset? its a bog stock 1jz tt 1991 sorry to hang a prob, spent 3 days clicking buttons and learning pclink thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 15, 2022 Report Share Posted December 15, 2022 You need to attach a copy of your tune and a log of it cranking as Vaughan has requested. No one can help you with no data or info to show us what you are working with. Quote Link to comment Share on other sites More sharing options...
Snora Posted December 15, 2022 Author Report Share Posted December 15, 2022 1jz logging.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 15, 2022 Report Share Posted December 15, 2022 Need a copy of the tune also. To get the tune, connect your laptop to the ecu and go to >file>save as. It will give you a .pclx file. The log shows no trigger 2 signal (cam sensor). Quote Link to comment Share on other sites More sharing options...
Snora Posted December 16, 2022 Author Report Share Posted December 16, 2022 gday file size 400 ish Kb too large to send thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 16, 2022 Report Share Posted December 16, 2022 That seems odd, it looks like you have only used 500k of your allowance so you should have several MB left. Anyhow, plenty of free file sharing options out there - upload the file to something like google drive, onedrive, dropbox, wetransfer or similar and share a link to it here instead. Quote Link to comment Share on other sites More sharing options...
Snora Posted December 16, 2022 Author Report Share Posted December 16, 2022 Thank you for helping Quote Link to comment Share on other sites More sharing options...
Snora Posted December 23, 2022 Author Report Share Posted December 23, 2022 Gday ive tried. Can I pay someone to do a screenshare to help set it up. tuning and trims I can handle thank you smile Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 24, 2022 Report Share Posted December 24, 2022 Can you not share the map so we can take a look at your settings for trig 2? If they are correct and you are still getting no trig 2 signal then we will try a trigger scope to see if that gives any further clues. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.