Jump to content

V88 MAP and IAT sensors check


Recommended Posts

Hi guys - I bought my V88 a fair while ago but am only now setting it up on the car. (has a serial in the 4000's and has been back to Vipec for an upgrade to current spects 12 months ago).

There is a MAP and IAT sensor in the box and I just want to check that they are still good. (The IATs is what came with the ECU a few years ago and the MAPs is one I ordered through my Vipec dealer)

The MAP sensor is a 5 BAR one I think. (I don't remember ordering it LOL) Yes?

I'd also forgot there was an IAT sensor with it, so have been sorting out one of the Bosch 0 280 130 085 sensors recommended in the current manual download.

When I checked in the box, the AIT that is in there is not the Bosch 0 280 130 085 unit. (see picture below)

So - how does the calibration of this sensor compare to the default Bosch 0 280 130 085 IAT calibration that should be in my ECU? (as the ECU was sent back to be upgraded 12 months ago I'm assuming that the default calibration is for the Bosch 0 280 130 085 listed in the current manual)

If the calibration is different, could you please let me know the specs for the one shown in the image below?



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...