levincoupe Posted February 5, 2014 Report Share Posted February 5, 2014 Im trying to prepare my 4age ae86 for my v88. I want to use my dizzy for spark but run sequential injection. I have a 24 tooth and a 4 tooth wheel in my distributor. Do i need to remove 3 teeth from the 4 tooth trigger for the sync. The engine is set to tdc and the tooth with the dot on it is just past thesensor. Is this the tooth that i should keep and remove the other 3? Cheers, Trent Quote Link to comment Share on other sites More sharing options...
Scott Posted February 6, 2014 Report Share Posted February 6, 2014 Hi Trent, Yes, you will need to remove 3 teeth from the 4 tooth wheel. It doesn't matter which 3, as the trigger calibration section will take care of this. Some of the later toyota distributors had an extra wheel which had one 'ramped' tooth. Regards, Scott Quote Link to comment Share on other sites More sharing options...
levincoupe Posted February 6, 2014 Author Report Share Posted February 6, 2014 Thanks for the reply. Trent Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.